The video is about cleaning the electrode block of a Sensacore ST 200 Pro device.
The electrodes have a specific order and are separated by rubber bumpers.
After removing the stage, the electrodes can be cleaned and maintained properly.
โก๏ธ Cleaning the electrodes inside the Sensacore ST 200 Pro by using a paper or needle to remove any residue.
๐ง Injecting water into the electrodes from above, flipping them over and injecting water again to clean them.
โซ Using a piece of eraser to remove any black residue from the electrodes.
๐ข Injecting distilled water into the green electrode and ensuring the water flows out from below.
๐ต Contacting engineering if still using the blue potentiometer model.
๐ The video is about cleaning the electrode block of the Sensacore ST 200 Pro.
๐ The yellow gel or black crust that forms on the electrode block should be removed.
๐ก The cleaning process involves aspirating hypochlorite, soaking the block, and then drying it.
๐ง The video demonstrates the process of cleaning and assembling electrodes for the SENSACORE ST 200 PRO.
โก The presence of all the required rubber components is crucial for the proper functioning of the equipment.
๐ฆ After cleaning the electrode block, the electrodes are inserted and the hose from the needle is connected without any twists or obstructions.
๐ The video is about cleaning the electrode block of the SENSACORE ST 200 PRO.
๐งผ The process involves connecting the telephone cable, inserting the block into the machine, and connecting the hose at the bottom for cleaning.
๐ฅ If bubbles appear, they need to be removed by tapping the block so that it is free of air inside.